Extracted Pole Bandpass Filters Based On The Slotted Irises

A new design of directly coupled bandpass filter that provides extracted stopband poles is presented by the example of a capacitive iris filter. The attenuation poles are introduced by cutting in iris strips additional slots parallel to the wider waveguide wall. This way of extracted poles implementation does not require spatially developed elements (in particular overmoded ones). The K-inverter corresponding the modified iris changes slightly and may be easily fine-tuned. Additional slot dimensions determine the location and Q-factor of the attenuation poles, which may be placed in the parasitic passband or on a required skirt of the main one. Numerical examples for the three-section filter in WR90 waveguide demonstrate the possibility to increase the skirt selectivity or to improve the stopband attenuation without any extension of the filter dimensions, keeping the same return loss within the passband.