Title :
Magnet design for the DARHT linear induction accelerators
Author :
Burns, Michael ; Chellis, Ken ; Mockler, Cathy ; Tucker, Tom ; Velasquez, George ; van Maren, Roger
Author_Institution :
Los Alamos Nat. Lab., NM, USA
Abstract :
The linear induction accelerator focus magnet design for the Dual-Axis Radiographic Hydrotest (DARHT) facility is presented. Prototype solenoid magnets have demonstrated less than 1-mrad peak transverse error field while using large copper conductors. The design features multi-filar winding to reduce field errors due to winding geometry, iron rings within the solenoid to greatly reduce the effects of winding errors, and low-profile dipole trim magnets to correct installation errors. Numerical modeling of several designs is presented as well as data from magnetic field measurements of a series of prototype magnets.<>
Keywords :
beam handling equipment; collective accelerators; electromagnets; electron accelerators; solenoids; Cu conductors; DARHT linear induction accelerators; Dual-Axis Radiographic Hydrotest; focus magnet design; installation errors; low-profile dipole trim magnets; magnetic field measurements; peak transverse error field; solenoid magnets; winding geometry; Acceleration; Accelerator magnets; Conductors; Copper; Error correction; Geometry; Linear accelerators; Prototypes; Radiography; Solenoids;
Conference_Titel :
Particle Accelerator Conference, 1991. Accelerator Science and Technology., Conference Record of the 1991 IEEE
Conference_Location :
San Francisco, CA, USA
Print_ISBN :
0-7803-0135-8
DOI :
10.1109/PAC.1991.164882
