DocumentCode
2180245
Title
Construction and results of the 50 mm short R&D dipole magnets
Author
Morgan, G.H. ; Anerella, M. ; Cottingham, J. ; Ganetis, G. ; Garber, M. ; Ghosh, A. ; Goodzeit, C. ; Greene, A. ; Gupta, R. ; Herrera, J. ; Kahn, S. ; Kelly, E. ; Morgillo, A. ; Muratore, J. ; Prodell, A. ; Radusewicz, P. ; Rehak, M. ; Rohrer, E.P. ; Samp
Author_Institution
Brookhaven Nat. Lab., Upton, NY, USA
fYear
1991
fDate
6-9 May 1991
Firstpage
2167
Abstract
The first two of the larger-bore, 1.8-m SSC (Superconducting Super Collider) dipoles have been built and tested. The 2-D design of the coil using the new, wider cables and the iron cross section is reviewed and the coil ends are described. Results from tests, including quench performance, magnetic field measurements, and strain-gauge data, are presented.<>
Keywords
beam handling equipment; proton accelerators; storage rings; superconducting magnets; synchrotrons; 1.8 m; 2-D design; 50 mm; SSC; Superconducting Super Collider; coil ends; dipole magnets; magnetic field measurements; quench performance; strain-gauge data; Boring; Cable insulation; Iron; Laboratories; Magnetic fields; Research and development; Superconducting cables; Superconducting coils; Superconducting magnets; Testing;
fLanguage
English
Publisher
ieee
Conference_Titel
Particle Accelerator Conference, 1991. Accelerator Science and Technology., Conference Record of the 1991 IEEE
Conference_Location
San Francisco, CA, USA
Print_ISBN
0-7803-0135-8
Type
conf
DOI
10.1109/PAC.1991.164901
Filename
164901
Link To Document