DocumentCode
2190960
Title
Evaluating medium voltage cable splices and terminations
Author
Taylor, Bill ; Morrison, Glenn
Author_Institution
3M, USA
fYear
2000
fDate
19-23 June 2000
Firstpage
188
Lastpage
194
Abstract
The electrical manufacturing industry has taken advantage of advances in material and manufacturing technology to provide cables and cable accessory systems for medium voltage cable systems that are more economical and reliable to install and operate. However, the industry has left the choice of both cables and accessory systems up to relatively untrained personnel such as contractors and electricians. While, there have been several papers presented by knowledgeable individuals within the industry to aid in the selection of cables, very little has been presented to aid in the choice of accessories. It is the purpose of this paper to address this issue.
Keywords
cable jointing; electric connectors; power cable testing; MV power cable splices; MV power cable terminations; electrical manufacturing industry; manufacturing technology; material technology; power cable evaluations; Cable shielding; Conducting materials; Dielectric materials; Manufacturing; Medium voltage; Power cables; Protection; Semiconductor materials; Splicing; Stress;
fLanguage
English
Publisher
ieee
Conference_Titel
Pulp and Paper Industry Technical Conference, 2000. Conference Record of 2000 Annual
Conference_Location
Atlanta, GA, USA
ISSN
0190-2172
Print_ISBN
0-7803-6331-0
Type
conf
DOI
10.1109/PAPCON.2000.854224
Filename
854224
Link To Document