A method for magnetizing curve identification in vector controlled induction motor drives

Author

Bellini, A. ; Bifaretti, S.

Author_Institution

Dept. of Electron. Eng., Rome Univ. "Tor Vergata"

fYear

2006

fDate

23-26 May 2006

Firstpage

955

Lastpage

959

Abstract

In vector controlled induction motor drives, to optimally select the stator or rotor flux reference, in field weakening region, it is necessary to take into consideration also the machine magnetizing curve. The paper proposes a methodology for the identification of the magnetizing curve that can be applied at standstill. The approach consists on applying to the stator windings a suitable mono-phase current waveform and memorizing the stator voltage. A subsequent elaboration of the two waveforms allows the determination of the shape of the magnetizing inductance

Keywords

induction motor drives; machine vector control; magnetic fields; magnetic flux; rotors; stators; field weakening region; magnetizing curve identification; magnetizing inductance; monophase current waveform; rotor flux reference; stator flux reference; stator voltage memorizing; stator windings; vector controlled induction motor drives; Current measurement; Inductance; Induction motor drives; Inverse problems; Magnetic flux; Reluctance motors; Rotors; Saturation magnetization; Stators; Voltage;

fLanguage

English

Publisher

ieee

Conference_Titel

Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. International Symposium on

Conference_Location

Taormina

Print_ISBN

1-4244-0193-3

Type

conf

DOI

10.1109/SPEEDAM.2006.1649905

Filename

1649905