Microwave assisted heating of human blood at 2450 MHz frequency using various composite supports

The growing interest in the use of microwaves to process materials is primarily due to ‘volumetric heating’. Microwave energy has been beneficial for a spectrum of applications in engineering and medical fields especially for heating, thawing, drying, warming and material processing. Warming/heating of blood sample is a very common medical practice and microwave heating could be extensively used due to the advantages such as rapid, controlled, selective and uniform heating effects. The present work has been carried out to study efficient heating due to microwaves for one-dimensional (1-D) human blood samples placed on Teflon, various ceramic (Al2O3, SiC), and composite supports. Maxwell´s equation for electromagnetic wave propagation (electric field equation) and the non-linear heat conduction equation (energy balance equation) with the appropriate boundary conditions are simultaneously solved using Galerkin´s finite element method to obtain power absorption and transient temperature profile for the blood sample-support assembly. A preliminary study has been carried out via average power vs sample thickness diagram to estimate microwave power absorption within blood samples for various cases. In addition, support thickness sensitivity analysis has also been carried out and suitable support thickness has been recommended. The maxima in average power, also termed as ‘resonances’, are observed for specific blood sample thicknesses and the two consecutive resonances of significant magnitudes are termed as R1 and R2 modes. For all cases, it is observed that microwave power absorption is enhanced in presence of metallic and composite supports during both R1 and R2 modes. The efficient heating strategies characterized by ‘large heating rates’ with ‘minimal thermal runaway’ i.e. uniform temperature distributions within the sample have been ass- ssed for both small and large blood sample thicknesses. Based on the detailed spatial distributions of power and temperature for various cases, suitable combinations of supports have been recommended as optimal heating strategies for blood samples corresponding to both R1 mode and R2 mode. Present study recommends the efficient way to use microwaves in a single mode waveguide and the heating scheme can be suitably extended for heating of any other animal blood samples with known/ measurable dielectric properties.