Active vibration control using an electromagnetic absorber with two degrees of freedom

Author

Adkins, Christopher A. ; Huang, Zhiming ; Wong, Budi W. ; Walcott, Bruce L. ; Rouch, Keith E.

Author_Institution

Dept. of Electr. Eng., Kentucky Univ., Lexington, KY, USA

fYear

1996

fDate

11-14 Apr 1996

Firstpage

175

Lastpage

178

Abstract

A novel design for an actively controlled, two degree-of-freedom electromagnetic absorber is considered for reducing chatter in a boring bar. The absorber is suspended inside the free end of the boring bar and consists of a mass with eight poles, each pole having a coil attached to it. The proper motion of the absorber is achieved by controlling the electromagnetic force via the applied current to the coils so as to suppress the chatter of the boring bar. A theoretical study to prove the proposed concept is conducted by first obtaining the dynamics of the system. The control system is then designed to control the lowest vibration mode of the boring bar, which is the mode dominating the chatter, using feedback control theory

Keywords

coils; control systems; electromagnetic devices; electromagnetic forces; machine tools; vibration control; active vibration control; boring bar; chatter reduction; coils; control system; current; electromagnetic absorber; electromagnetic force control; feedback control theory; system dynamics; two degrees of freedom; vibration mode control; Actuators; Boring; Clamps; Coils; Control systems; Machine tools; Machining; Magnetic cores; Motion control; Vibration control;

fLanguage

English

Publisher

ieee

Conference_Titel

Southeastcon '96. Bringing Together Education, Science and Technology., Proceedings of the IEEE

Conference_Location

Tampa, FL

Print_ISBN

0-7803-3088-9

Type

conf

DOI

10.1109/SECON.1996.510051

Filename

510051