The booster to storage ring transport line for SRRC

Author

Wang, M.H. ; Kuo, C.C. ; Hsue, C.S.

Author_Institution

Synchrotron Radiat. Res. Center, Hsinchu, Taiwan

fYear

1991

fDate

6-9 May 1991

Firstpage

2697

Abstract

A 70-m-long booster to storage ring (BTS) transport line has been designed for the SRRC to transport the beam extracted from the booster to the storage ring at 1.3 GeV. The booster is outside the main ring and has a vertical level difference of 4.15 m relative to the ring. The design has been optimized to reach small beam size and to reduce the effects of magnet errors. In total, two families of bending magnets and 17 quadrupoles are used in the BTS line. Diagnostic instruments and correctors are equipped to measure the beam intensity, position, emittance, and energy spread and to steer the beam. A method of injection into the storage ring is also presented.<>

Keywords

beam handling equipment; magnets; storage rings; BTS line; SRRC; beam intensity; beam size; bending magnets; booster to storage ring transport line; magnet errors; main ring; quadrupoles; vertical level difference; Costs; Design optimization; Energy measurement; Instruments; Magnetic separation; Physics; Position measurement; Storage rings; Structural beams; Synchrotrons;

fLanguage

English

Publisher

ieee

Conference_Titel

Particle Accelerator Conference, 1991. Accelerator Science and Technology., Conference Record of the 1991 IEEE

Conference_Location

San Francisco, CA, USA

Print_ISBN

0-7803-0135-8

Type

conf

DOI

10.1109/PAC.1991.165075

Filename

165075