Title :
Experimental tests of the power supply and prototype cell for the 1.5 MeV SLIA acceleration unit
Author :
Corcoran, P. ; Bowen, B. ; Bailey, V. ; Carboni, V. ; Fockler, J. ; Chugg, B. ; Nishimoto, H.
Author_Institution :
Pulse Sci. Inc., San Leandro, CA, USA
Abstract :
The prototypes for the nominally 300-kV pulsed power supply and acceleration cell were built and tested in order to determine critical design parameters needed for their final designs. The pulsed power supply produced a 73-ns-long trapezoidal pulse rising in 3 ns (10-90%) and having high frequency ripple of less than 2%. The power supply´s throughput jitter was 1.5 ns (1a). The cell was driven by the power supply and had a resistor taking the place of the beam loading. The cell tests showed that the ferrite had a useful flux swing of 0.45 T (20.7 mV-s) before the magnetization current pulled the cell voltage down by more than a few percent.<>
Keywords :
linear accelerators; particle accelerator accessories; power supplies to apparatus; 1.5 MeV SLIA acceleration unit; beam loading; cell voltage; critical design parameters; flux swing; frequency ripple; magnetization current; power supply; prototype cell; resistor; throughput jitter; trapezoidal pulse; Ferrites; Frequency; Jitter; Life estimation; Power supplies; Prototypes; Pulsed power supplies; Resistors; Testing; Throughput;
Conference_Titel :
Particle Accelerator Conference, 1991. Accelerator Science and Technology., Conference Record of the 1991 IEEE
Conference_Location :
San Francisco, CA, USA
Print_ISBN :
0-7803-0135-8
DOI :
10.1109/PAC.1991.165205
