DocumentCode
2234044
Title
Beam breakup considerations in the design of multiple off-axis gaps in an induction accelerator cell for SLIA
Author
Edighoffer, John
Author_Institution
Pulse Sci. Inc., San Leandro, CA, USA
fYear
1991
fDate
6-9 May 1991
Firstpage
3117
Abstract
Measurements of the transverse impedances of the SLIA prototype cell were performed using the bead pull technique. These measurements were compared to a computer model (BBUS) of the prototype cell. With appropriate damping, the results look very encouraging for the SLIA accelerator.<>
Keywords
linear accelerators; BBUS; bead pull; beam breakup; computer model; damping; induction accelerator cell; multiple off-axis gaps; prototype cell; transverse impedances; Acceleration; Coaxial components; Cutoff frequency; Dielectric measurements; Frequency measurement; H infinity control; Impedance measurement; Particle beams; Prototypes; Pulse measurements;
fLanguage
English
Publisher
ieee
Conference_Titel
Particle Accelerator Conference, 1991. Accelerator Science and Technology., Conference Record of the 1991 IEEE
Conference_Location
San Francisco, CA, USA
Print_ISBN
0-7803-0135-8
Type
conf
DOI
10.1109/PAC.1991.165206
Filename
165206
Link To Document