Automated visual inspection and interpretation system for weld quality evaluation

The visual inspection of weld beads and subsequent evaluation of the weld quality is an integral part of the commercial welding environment. However, this inspection process tends to be both time and labor intensive. An automated system for the performance of this task has been developed. The sequence of events in the operation of the vision-based system are: (1) image capture; (2) image enhancement; (3) image processing; and (4) image evaluation. To minimize cost and complexity, the system uses conventional video camera and related hardware and software for the image-capture and image enhancement portion of the evaluation process. Various weld processes were observed to have certain characteristic features which were most relevant for the inspection and evaluation of the particular process. Image processing codes were written to extract those features of the weld beads and store this information in data files for subsequent assessment. Numerical algorithms were written, tailored to each of the weld processes, to perform the image evaluation portion of the quality evaluation process. This result is expressed as a relative quality rating which was found to correlate well with a quality rating derived by direct observation by a human inspector of various quality welds. The vision-based weld quality evaluation system has potential for use as a post-weld quality evaluation system, or, due to the high update rate of the overall vision system (>10 Hz), as part of a real-time control system