DocumentCode :
2259484
Title :
Roll autopilot design for reentry vehicle with moving-mass control system
Author :
Yafei, Wang ; Jianqiao, Yu ; Linlin, Wang ; Yuanchuan, Shen
Author_Institution :
School of Aerospace Engineering, Beijing Institute of Technology, Beijing 100081
fYear :
2015
fDate :
28-30 July 2015
Firstpage :
5572
Lastpage :
5576
Abstract :
An improved roll autopilot for maneuvering reentry vehicles controlled by moving-mass element is presented in this paper. Since the bandwidth of the servo greatly restricts the dynamic response of the system, the parameters of the autopilot are designed associated with the damping ratio and undamped natural frequency of the servo. By configuring the dominant poles of the transfer function, an excellent dynamic response of the closed-loop system is achieved. Furthermore, the autopilot is applicable to various conditions in the flight envelope, and has good tracking ability for both roll angle and roll rate instruction. The effect of the roll control autopilot is validated by 6-DOF trajectory mathematical simulations.
Keywords :
Actuators; Aerodynamics; Aerospace control; Aerospace electronics; Decision support systems; Lead; Zinc; Autopilot; moving-mass; reentry vehicle; roll control;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Control Conference (CCC), 2015 34th Chinese
Conference_Location :
Hangzhou, China
Type :
conf
DOI :
10.1109/ChiCC.2015.7260509
Filename :
7260509
Link To Document :
بازگشت