DocumentCode :
2265457
Title :
Design and implementation of 0.8-V Active RC polyphase filter using 0.18-µm CMOS inverters with resistive level shifter
Author :
Yazawa, Kazuki ; Tanimoto, Hiroshi
Author_Institution :
Kitami Inst. of Technol., Kitami, Japan
fYear :
2009
fDate :
24-27 May 2009
Firstpage :
2958
Lastpage :
2961
Abstract :
A CMOS inverter based amplifier operable down to 0.8 V of power supply has been proposed. The CMOS inverter amplifier has a level shifter circuit at its input to effectively reduce its threshold voltages. The level shift is realized by feeding an input signal via a resistive voltage divider which is connected between VDD and GND. The proposed amplifiers are used to construct a three-stage active RC polyphase filter with 0.3 to 3 MHz passband. The active RC polyphase filter was fabricated in 0.18 mum CMOS technology, and measured results show that the proposed amplifier successfully operates from 0.8 V supply voltage.
Keywords :
CMOS analogue integrated circuits; RC circuits; active filters; amplifiers; invertors; voltage dividers; CMOS inverter amplifier; bandwidth 0.3 MHz to 3 MHz; level shifter circuit; resistive level shifter; resistive voltage divider; size 0.18 mum; three-stage active RC polyphase filter; voltage 0.7 V; Active filters; CMOS logic circuits; CMOS technology; Capacitors; Inverters; Leakage current; Power amplifiers; Power supplies; Resistors; Threshold voltage;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Circuits and Systems, 2009. ISCAS 2009. IEEE International Symposium on
Conference_Location :
Taipei
Print_ISBN :
978-1-4244-3827-3
Electronic_ISBN :
978-1-4244-3828-0
Type :
conf
DOI :
10.1109/ISCAS.2009.5118423
Filename :
5118423
Link To Document :
بازگشت