Title :
Atmospheric pressure plasma jets of fine-point doping for the selective emitter of solar cell
Author :
Sewhan Jin ; Hyunchul Kim ; Sanghun Kim ; Myoungsoo Yun ; Gi-Chung Kwon ; Guangsup Cho
Author_Institution :
Dept. of Electrophys., Kwangwoon Univ., Seoul, South Korea
Abstract :
Summary form only given. The solar cell manufacturing comprises the diffusion process to form a P-N junction on the silicon wafer. The impurities of III or V group are used in the diffusion process. Those are diffused thermally into the silicon wafer. The low efficiency is caused by the resistance of the silicon wafer between electrodes. The resistance is reduced with the heavy molecular doping in solar-cells while the surface recombination between particles is increased. However, the light atom doping in the solar cell causes the reduction of the surface recombination but increasing the resistance. The SE(selective emitter)-doping is that the impurities lightly diffuse on the surface of silicon wafer except for the heavily doped region under the front electrode. The high doping region brings a low resistance of the wafer between the electrodes. As a result, the solar cell efficiency increases. Most of the equipments for solar cell process are high cost while the plasma jet doping equipments are expected to be a low cost. For the remaining the competition, the process of the solar cell must be a low cost and improves the performance. The plasma jet devices are developed for the doping process by replacing the device of laser doping in the doping of selective-emitter. In this study, the basic characteristics of the plasma jets for doping process are investigated. The thermal characteristics about the plasma current are analyzed. Also the influence of adding wafer and coating dopant on the plasma jet discharge are analyzed with H3PO4 used for dopant. When the plasma jet is irradiated to the dopant layer on the wafer, the joule heat is created by plasma current. The dopant is diffused by thermal reaction on the doping layer of the wafer that is investigated by SIMS(secondary ion mass spectrometry). The multi-plasma jets device is prepared for increasing the production efficiency. The light doped wafer is coated by dopant is irradiated by multi-pl- sma jets. The doping depths of the irradiation region were dipper than other side. The doping depths were investigated by SIMS.
Keywords :
jets; mass spectra; semiconductor doping; solar cells; thermal engineering; SE doping; SIMS; atmospheric pressure plasma jets; diffusion process; dopant; doping depth; electrodes; fine-point doping; irradiation region; joule heat; light atom doping; molecular doping; secondary ion mass spectrometry; selective emitter; silicon wafer; solar cell efficiency; solar cell manufacturing; surface recombination; thermal characteristics; thermal reaction; Doping; Electrodes; Photovoltaic cells; Plasmas; Silicon; Surface resistance;
Conference_Titel :
Plasma Sciences (ICOPS) held with 2014 IEEE International Conference on High-Power Particle Beams (BEAMS), 2014 IEEE 41st International Conference on
Conference_Location :
Washington, DC
Print_ISBN :
978-1-4799-2711-1
DOI :
10.1109/PLASMA.2014.7012280