Three level buck converter with control and soft startup

The three level buck converter can offer high efficiency and high power density in VR and POL applications. The gains are made possible by adding a flying capacitor that reduces the MOSFET voltage stress by half allowing for the use of low voltage devices, doubles the effective switching frequency, and decreases the inductor size by reducing the volt-second across the inductor. To achieve high efficiency and power density the flying capacitor must be balanced at half of the input voltage and the circuit must be started up without the MOSFETs seeing the full input voltage for protection purposes. This paper provides a new novel control method to balance the flying capacitor with the use of current control and offers a simple startup solution to protect the MOSFETs during start up. Experimental verification shows the efficiency gains and inductance reduction.