Intercomparison measurements of direct voltage from 10 kV to 200 kV between NRC, Canada and JEMIC, Japan

Author

McComb, T.R. ; So, E. ; Bennett, D. ; Shimizu, K. ; Shishido, K. ; Miyakoda, M. ; Hirayama, H.

Author_Institution

Inst. for Nat. Meas. Stand., Nat. Res. Council of Canada, Ottawa, Ont., Canada

fYear

2002

fDate

16-21 June 2002

Firstpage

62

Lastpage

63

Abstract

Two 100 kV JEMIC dividers were used as travelling standards in comparison tests against standard dividers maintained at JEMIC and at NRC. The dividers could be used independently or combined to provide a travelling standard rated at 200 kV. The voltage measured by each system is taken as the product of the ratio of that system and the reading on the corresponding multimeter. The difference between the same voltage measured on both systems simultaneously was always less than /spl plusmn/40 /spl mu/V/V.

Keywords

high-voltage techniques; measurement standards; voltage dividers; voltage measurement; 10 to 200 kV; JEMIC divider; direct voltage; intercomparison measurement; multimeter; travelling standard; Circuit testing; Councils; IEC standards; Impedance; Inspection; Laboratories; Low voltage; Measurement standards; Resistors; Voltage measurement;

fLanguage

English

Publisher

ieee

Conference_Titel

Precision Electromagnetic Measurements, 2002. Conference Digest 2002 Conference on

Conference_Location

Ottawa, Ontario, Canada

Print_ISBN

0-7803-7242-5

Type

conf

DOI

10.1109/CPEM.2002.1034720

Filename

1034720