DocumentCode
2283927
Title
High voltage scaling with minimum power corrections
Author
Wood, B.M. ; Paulusse, D.
Author_Institution
Nat. Res. Council of Canada, Ottawa, Ont., Canada
fYear
2002
fDate
16-21 June 2002
Firstpage
374
Lastpage
375
Abstract
The design and construction of two high voltage resistive dividers and an associated automated four terminal resistance ratio bridge are described. Together they allow ratio calibration from 10 V to 1200 V without any power coefficient corrections above the 10 V at 10 k/spl Omega/ level. The bridge may also be used for calibration of resistors at relatively high powers.
Keywords
bridge instruments; calibration; electric resistance measurement; resistors; voltage dividers; 10 kohm; 10 to 1200 V; DC voltage dividers; automated four terminal resistance ratio bridge; high power resistor calibration; high voltage resistance ratio calibration; power coefficient corrections; ratio calibration voltage range; resistive dividers; Bridge circuits; Calibration; Insulation; Integrated circuit interconnections; Power measurement; Printed circuits; Resistors; Stability; Surface resistance; Voltage;
fLanguage
English
Publisher
ieee
Conference_Titel
Precision Electromagnetic Measurements, 2002. Conference Digest 2002 Conference on
Conference_Location
Ottawa, Ontario, Canada
Print_ISBN
0-7803-7242-5
Type
conf
DOI
10.1109/CPEM.2002.1034878
Filename
1034878
Link To Document