DocumentCode :
2301057
Title :
Experimental and theoretical investigations on connector insertion phase
Author :
Manfalouti, A. El ; Jemaa, N. Ben ; Abdi, R. El ; Reiss, T.
Author_Institution :
Campus of Beaulieu, Rennes I Univ., France
fYear :
2003
fDate :
8-10 Sept. 2003
Firstpage :
17
Lastpage :
22
Abstract :
Inside a connector, an interface with low insertion force and contact resistance is required for low cost materials and coating such as copper alloys with tin coating. In addition, related to the application, the operating parameters have a wide range of values of currents, forces and materials. In this paper, we present a new experimental method based on nonintrusive probing of the deflection of the spring terminal, using a laser technique. The main feature is that the reflection of the laser beam on the spring allows the determination of the contact force of the lamella-spring inside the female part. The technique acquires the following insertion parameters during the insertion stroke: contact deflection δ which allows contact force Fc, insertion force Fi and contact resistance Rc. It was found that the insertion force takes a maximum value and decreases to the stable value, which depends on the size and the material of the pin. However contact resistance decreases sharply on first insertion and tends towards stable values on completing the insertion process, which are less sensitive to the pin diameter. Finally, discrepancies were observed between the experimental and calculated data with simple numerical models. More complex models are in progress, which should improve the convergence of the theoretical approach to experimental results and proceed to the optimization of the connector parameters.
Keywords :
contact resistance; displacement measurement; electric connectors; electric resistance measurement; electrical contacts; force measurement; measurement by laser beam; connector insertion phase; contact deflection; contact force; contact resistance measurement; copper alloys; female part lamella-spring; insertion force measurement; laser measurement; nonintrusive probing; spring terminal deflection; tin coating; Coatings; Connectors; Contact resistance; Copper alloys; Costs; Laser beams; Optical materials; Optical reflection; Springs; Tin;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Electrical Contacts, 2003. Proceedings of the Forty-Ninth IEEE Holm Conference on
Print_ISBN :
0-7803-7862-8
Type :
conf
DOI :
10.1109/HOLM.2003.1246473
Filename :
1246473
Link To Document :
بازگشت