Title :
Fabrication of Polymer Magnetics
Author :
Ba Do, Thanh ; Halloran, John W.
Author_Institution :
Univ. of Michigan, Ann Arbor
Abstract :
Here we discuss composites in thermoplastics, which can be flexible and formed or molded in place when heated. Elastomeric resins would be more flexible, depending on the cross link density of the elastomeric gel the stiffening for powder filler. Most elastomers must be oven cured to provide low dielectric loss.
Keywords :
elastomers; filled polymers; polymer gels; cross link density; elastomeric gel; elastomeric resins; low dielectric loss; polymer magnetics; powder filler; thermoplastics composites; Dielectrics; Fabrication; Ferrites; Frequency; Magnetic materials; Magnetic properties; Permeability; Permittivity; Polymers; Powders;
Conference_Titel :
Antennas and Propagation Society International Symposium, 2007 IEEE
Conference_Location :
Honolulu, HI
Print_ISBN :
978-1-4244-0877-1
Electronic_ISBN :
978-1-4244-0878-8
DOI :
10.1109/APS.2007.4395843
