DocumentCode :
2312444
Title :
Low contact resistivity ohmic contacts to 6H-silicon carbide
Author :
Dev Alok ; Baliga, B.J. ; McLarty, P.K.
Author_Institution :
Power Semicond. Res. Center, North Carolina State Univ., Raleigh, NC, USA
fYear :
1993
fDate :
5-8 Dec. 1993
Firstpage :
691
Lastpage :
694
Abstract :
The resistivity of ohmic contacts to N/sup +/ 6H-silicon carbide substrates, with Ti as the contact material, was studied using the circular TLM structure. Two dimensional numerical simulation of the circular TLM structures were performed to analyze the current distribution and its influence on the extraction procedure. A contact resistivity of 2/spl times/10/sup -5/ ohm-cm/sup 2/ was obtained without any high temperature anneal by using an N/sup +/ surface implant layer. This contact resistivity is an order of magnitude lower than any of the previously reported values for n-type 6H-silicon carbide.<>
Keywords :
contact resistance; current distribution; ohmic contacts; semiconductor materials; semiconductor-metal boundaries; silicon compounds; simulation; titanium; N/sup +/ 6H-SiC substrates; N/sup +/ surface implant layer; SiC-Ti; Ti contact material; circular TLM structure; current distribution; extraction procedure; low contact resistivity contacts; ohmic contacts; two dimensional numerical simulation; Annealing; Implants; Ohmic contacts; Performance analysis; Semiconductor device doping; Semiconductor materials; Silicon carbide; Substrates; Temperature; Thermal conductivity;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Electron Devices Meeting, 1993. IEDM '93. Technical Digest., International
Conference_Location :
Washington, DC, USA
ISSN :
0163-1918
Print_ISBN :
0-7803-1450-6
Type :
conf
DOI :
10.1109/IEDM.1993.347218
Filename :
347218
Link To Document :
بازگشت