DocumentCode :
2313317
Title :
A practical RF front-end for high performance GNSS receivers
Author :
Valle, Ramón López La ; García, Javier G. ; Roncagliolo, Pedro A. ; Muravchik, Carlos H.
Author_Institution :
Dept. de Electrotecnia, UNLP, La Plata, Argentina
fYear :
2011
fDate :
29-30 June 2011
Firstpage :
104
Lastpage :
109
Abstract :
We present the design and implementation of a GNSS front-end intended for receiving the L1/E1 band of GPS/Galileo and GLONASS signals. The proposed scheme consists of a radio frequency (RF) stage, with a low noise amplifier which has a noise figure of 1.1dB. Then, the RF signals are down-converted to an intermediate frequency, where the GPS/Galileo and GLONASS bands are separated. Thanks to this separation, a considerable reduction of the necessary sampling rate for the digitalization stage is achieved. This simplifies and reduces the power consumption of this stage of the complete GNSS receiver. The present design is versatile since it can be used to receive signals from the L2 band by replacing only a few components, without the necessity of modifying the printed circuit board. Measurements realized to an implemented prototype that validate the proposed design are presented.
Keywords :
Global Positioning System; UHF amplifiers; low noise amplifiers; printed circuits; radio receivers; GLONASS; GPS/Galileo; L1/E1 band; frequency 1573 MHz to 1577 MHz; frequency 1598 MHz to 1606 MHz; high performance GNSS receiver; low noise amplifier; noise figure 1.1 dB; practical RF front end; printed circuit board; radio frequency stage; Bandwidth; Gain; Global Navigation Satellite Systems; Global Positioning System; Noise; Receivers; Satellites;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Localization and GNSS (ICL-GNSS), 2011 International Conference on
Conference_Location :
Tampere
Print_ISBN :
978-1-4577-0186-3
Electronic_ISBN :
978-1-4577-0187-0
Type :
conf
DOI :
10.1109/ICL-GNSS.2011.5955270
Filename :
5955270
Link To Document :
بازگشت