Title : 
Comparison of Control Approaches For Tracking Control of a 3 DOF Parallel Robot: Experimental Results
         
        
            Author : 
Ren, Lu ; Mills, James K.
         
        
            Author_Institution : 
Dept. of Mech. & Ind. Eng., Univ. of Toronto, Toronto, ON
         
        
        
        
        
        
            Abstract : 
In this paper, to study the effect of different control approaches on improving trajectory tracking accuracy for a 3 degree-of-freedom (DOF) planar parallel robot, we tested two synchronized-type controllers: PI-type synchronized control and adaptive synchronized (A-S) control; and conventional PID control and adaptive control. Here PID control and PI-type synchronized control are dynamic model-free while the adaptive control and A-S control are dynamic model-based. Because of the closed-loop kinematic chain mechanism of the experimental planar parallel robot used in this study, trajectory tracking control of this robot may be treated as a synchronization problem, and consequently, use of the synchronized control approaches can substantially improve the trajectory tracking performance of the robot end-effector compared with approaches without synchronization. Through conducting experiments on an experimental 3-DOF P-R-R type planar parallel robot by using the four control approaches, the above claims are demonstrated.
         
        
            Keywords : 
PI control; adaptive control; closed loop systems; end effectors; manipulator kinematics; position control; synchronisation; three-term control; tracking; 3 DOF planar parallel robot; PI-type synchronized control; adaptive control; adaptive synchronized control; closed-loop kinematic chain mechanism; conventional PID control; end-effector; trajectory tracking control; Adaptive control; Aerodynamics; Leg; Parallel robots; Programmable control; Robot control; Robot kinematics; Sliding mode control; Three-term control; Trajectory; planar parallel manipulator; synchronized control;
         
        
        
        
            Conference_Titel : 
Control, Automation, Robotics and Vision, 2006. ICARCV '06. 9th International Conference on
         
        
            Conference_Location : 
Singapore
         
        
            Print_ISBN : 
1-4244-0341-3
         
        
            Electronic_ISBN : 
1-4214-042-1
         
        
        
            DOI : 
10.1109/ICARCV.2006.345098