DocumentCode :
2322965
Title :
Suggestions for winding tooling designs
Author :
Pressly, Brian
Author_Institution :
Bachi Co., Itasca, IL, USA
fYear :
2003
fDate :
23-25 Sept. 2003
Firstpage :
531
Lastpage :
534
Abstract :
The tooling of coil winding machines is critical to the optimum performance of the winding machine and to the quality of the coil being wound. The design of tooling for the machines requires detailed consideration of the coil. The design of the bobbin (if used), wire size and covering, wire tension winding terminations, type of winding, type of machine to be used together with the speed it is intended to run the machine are also critical. The tooling engineer´s input at the coil and bobbin design stage is very beneficial in ensuring overall product quality and that cost objectives are met.
Keywords :
coils; machine tools; winding (process); wires (electric); bobbin design; coil winding machines; machine speed; product quality; winding tooling design; wire size; wire tension; Coils; Costs; Design engineering; Flanges; Friction; Machine windings; Manufacturing; Springs; Wire; Wounds;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Electrical Insulation Conference and Electrical Manufacturing & Coil Winding Technology Conference, 2003. Proceedings
ISSN :
0362-2479
Print_ISBN :
0-7803-7935-7
Type :
conf
DOI :
10.1109/EICEMC.2003.1247943
Filename :
1247943
Link To Document :
بازگشت