Process characteristics and finishing effects research on horizontal spindle barrel finishing

Author

Li, W.H. ; Yang, S.Q. ; Chen, H.L.

Author_Institution

Coll. of Mech. Eng., Taiyuan Univ. of Technol., Taiyuan

fYear

2009

fDate

25-27 May 2009

Firstpage

2509

Lastpage

2512

Abstract

At present, crankshafts are finished mostly by abrasive cloth and manual steel brush, which is not ideal on finishing quality, efficiency and cost, especially cleanness degree does not meet design and use request. So horizontal spindle barrel finishing has been developed. Based on its finishing theory, process characteristics are key factors affecting the finishing effect, especially finishing uniformity. Process characteristics of motion parameters, finishing depth, finishing time, etc. are analyzed, and reasonable parameters are defined. Finally, finishing effects are verified. It provides basis for industry application of this process.

Keywords

finishing; shafts; crankshafts; horizontal spindle barrel finishing; industry application; process characteristics; Abrasives; Brushes; Costs; Frequency; Industry applications; Motion analysis; Rough surfaces; Steel; Surface finishing; Surface roughness; Barrel finishing; Crankshaft; Deburring; Finishing; Process characteristics;

fLanguage

English

Publisher

ieee

Conference_Titel

Industrial Electronics and Applications, 2009. ICIEA 2009. 4th IEEE Conference on

Conference_Location

Xi´an

Print_ISBN

978-1-4244-2799-4

Electronic_ISBN

978-1-4244-2800-7

Type

conf

DOI

10.1109/ICIEA.2009.5138659

Filename

5138659