Title :
Test of two 1.8 m SSC model magnets with iterated design
Author :
Wanderer, P. ; Cottingham, J.G. ; Dahl, P. ; Ganetis, G. ; Garber, M. ; Ghosh, A. ; Goodzeit, C. ; Greene, A. ; Herrara, J. ; Kahn, S. ; Kelly, E. ; Morgan, G. ; Muratore, J. ; Prodell, A. ; Rohrer, E.P. ; Sampson, W. ; Shutt, R. ; Thompson, P. ; Willen,
Author_Institution :
Brookhaven Nat. Lab., Upton, NY, USA
Abstract :
The authors report results from two 1.8 m long dipoles built as part of the Superconducting Super Collider (SSC) R&D program. These images contain design changes made on both the 1.8 m and the full-length 17 m dipoles to improve quench performance, magnetic field uniformity, and manufacturability. The magnets reach 8 T with little training. The magnet design and construction-including cable, coil, coil assembly and collaring, and yoke and shell-are described. Test results given include quench data, stress measurements, and field strength and multipoles
Keywords :
beam handling equipment; iterative methods; proton accelerators; superconducting magnets; synchrotrons; SSC model magnets; Superconducting Super Collider; cable; coil assembly; collaring; dipoles; field strength; iterated design; magnetic field uniformity; manufacturability; multipoles; quench performance; shell; stress measurements; yoke; Apertures; Assembly; Coils; Fixtures; Helium; Laboratories; Magnets; Steel; Testing; Welding;
Conference_Titel :
Particle Accelerator Conference, 1989. Accelerator Science and Technology., Proceedings of the 1989 IEEE
Conference_Location :
Chicago, IL
DOI :
10.1109/PAC.1989.73091
