Use of nano-silica in silicone rubber for ceramic insulators coatings in coastal areas

Author

Meyer, Luiz H. ; Cabral, Sergio H L ; Araújo, Edson ; Cardoso, Graziano ; Liesenfeld, Niklas

Author_Institution

Dept. of Electr. & Telecommun. Eng., Univ. of Blumenau, SC

fYear

2006

fDate

11-14 June 2006

Firstpage

474

Lastpage

477

Abstract

Nano-silica and micro-silica particles were mixed with silicone rubber. The resulting materials were compared with respect to erosion damage in inclined plane, and surface roughness and contact angle of virgin samples. Results have shown that nano-silica filled room temperature vulcanized (RTV) silicone rubber (SR) has higher erosion resistance than micro-silica filled RTV SR. The measurement of the contact angle of virgin samples has shown slightly lower hydrophobicity for the nano-silica filled samples than micro-silica filled samples. Surface roughness in nano-silica filled samples is lower than micro-silica filled samples, and one could expect less contamination accumulation of such nano-silica filled RTV SR materials. These preliminary laboratorial results indicate that the nano-silica filled RTV SR is better suited for contaminated environments than micro-silica filled RTV SR

Keywords

ceramics; contact angle; nanoparticles; silicon compounds; silicone rubber; surface roughness; wear resistance; 293 to 298 K; SiO₂; ceramic insulators coatings; contact angle; erosion resistance; hydrophobicity; microsilica particles; nanosilica particles; room temperature vulcanized silicone rubber; surface roughness; Ceramics; Coatings; Insulation; Rough surfaces; Rubber; Sea measurements; Strontium; Surface resistance; Surface roughness; Temperature;

fLanguage

English

Publisher

ieee

Conference_Titel

Electrical Insulation, 2006. Conference Record of the 2006 IEEE International Symposium on

Conference_Location

Toronto, Ont.

ISSN

1089-084X

Print_ISBN

1-4244-0333-2

Type

conf

DOI

10.1109/ELINSL.2006.1665359

Filename

1665359