DocumentCode :
2354886
Title :
Some measurement techniques of distribution line impedance on hot-line
Author :
Matsui, Keiju ; Kojima, Hiroo ; Koyama, Mitsuhiro ; Yamamoto, Isamu ; Ueda, Fukashi ; Mori, Hideki
Author_Institution :
Chubu Univ., Kasugai
fYear :
2005
fDate :
11-14 Sept. 2005
Abstract :
The line impedance could be measured by means of only passive elements such as inductors or resistors, that is presented at first. However, as the voltage and current used for the measurement are increased, the size of the inductor or resistor being used also needs to be increased, so in practice it would be virtually impossible to make an accurate measurement. Because of this, we have developed a novel measurement method for line impedance using an inverter circuit, which we describe secondly. In the third place, we propose another line impedance measurement method. The novel method is that the high frequency wave with minimum voltage is injected into the distribution line system. By means of this method, the line capacitance and the line inductance can be measured. These proposals are confirmed by the simulation or experiment
Keywords :
electric impedance measurement; invertors; power distribution lines; power system measurement; distribution line impedance; distribution line system; inverter circuits; line capacitance; line impedance measurement method; line inductance; passive elements; Circuits; Current measurement; Frequency; Impedance measurement; Inductors; Inverters; Measurement techniques; Resistors; Size measurement; Voltage; Distribution system; High frequency injection; Inverter; Line capacitance; Line impedance;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Power Electronics and Applications, 2005 European Conference on
Conference_Location :
Dresden
Print_ISBN :
90-75815-09-3
Type :
conf
DOI :
10.1109/EPE.2005.219207
Filename :
1665397
Link To Document :
بازگشت