Title :
Phase Variant CFA Study
Author :
Guss, W.C. ; Tracy, M.L. ; Deveau, J.
Author_Institution :
Beverly Microwave Div., Commun. & Power Ind.
Abstract :
The phase length of a crossed-field amplifier (CFA) depends primarily on the dimensions of the anode vanes. CPI/BMD has studied the relationship of individual vane components for a typical CFA, the SFD-262. The vane structure can be reduced to four separate sections, the vane stub, body, tip, and advance. The vane-to-vane capacitance and inductance were modeled analytically to produce phase sensitivity functions. After selecting component dimensions the RF behavior of the vanes is modeled with an electromagnetic code (HFSS). The resulting dispersion relationship was then compared to the dispersion in a series of CFA´s that have been constructed. The dispersion relationship was measured on a rotary table
Keywords :
microwave tubes; slow wave structures; SFD-262; crossed-field amplifier; dispersion relationship; phase length; phase similarity; rotary table; vane stub; Blades; Circuit simulation; Dispersion; Electromagnetic modeling; Frequency; Geometry; Impedance; Microwave amplifiers; Probes; Transmission line measurements; CFA; dispersion relationship; electromagnetic modeling; phase similarity;
Conference_Titel :
Vacuum Electronics Conference, 2006 held Jointly with 2006 IEEE International Vacuum Electron Sources., IEEE International
Conference_Location :
Monterey, CA
Print_ISBN :
1-4244-0108-9
DOI :
10.1109/IVELEC.2006.1666276
