DocumentCode :
2373642
Title :
Beam Emission Test on Carbon Nanotube Cathode of a Gridded Pierce Gun
Author :
Kim, Hae Jin ; Seo, Won Bum ; Choi, Jin Joo ; Han, Jae-Hee ; Yoo, Ji-Beom
Author_Institution :
Dept. of Radio Sci. & Eng., Kwangwoon Univ.
fYear :
0
fDate :
0-0 0
Firstpage :
479
Lastpage :
480
Abstract :
This paper presents the beam emission test of a triode-type Pierce gun pasted with a carbon nanotube (CNT). A DC emission current from the gridded-CNT cathode was measured to be 4.2 mA where the applied cathode voltage is -0.86 kV, grid and anode are ground, and cathode-to-grid distance is 200 mum. We also examined the mode field emission characteristics with two accelerating stages. The pulsed current emission of 2.8 mA was measured where a cathode voltage is -4 kV, cathode-grid potential difference is 1.38 kV, and pulse width is 100 mus
Keywords :
carbon nanotubes; cathodes; electron beams; electron guns; electron tube testing; nanotube devices; -0.86 kV; -4 kV; 1.38 kV; 100 mus; 2.8 mA; 200 micron; 4.2 mA; DC emission current; Pierce gun; anode; beam emission test; carbon nanotube cathode; cathode voltage; grid; mode field emission; pulsed current emission; Acceleration; Anodes; Carbon nanotubes; Cathodes; Current measurement; Pulse measurements; Pulse transformers; Space vector pulse width modulation; Testing; Voltage; Pierce gun; carbon nanotube; field emission;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Vacuum Electronics Conference, 2006 held Jointly with 2006 IEEE International Vacuum Electron Sources., IEEE International
Conference_Location :
Monterey, CA
Print_ISBN :
1-4244-0108-9
Type :
conf
DOI :
10.1109/IVELEC.2006.1666391
Filename :
1666391
Link To Document :
بازگشت