DocumentCode
2398783
Title
A Compact 200 kV Pulse Transformer System
Author
Rohwein, G.J. ; Lawson, R.N. ; Clark, M.C.
Author_Institution
Sandia National Laboratories
fYear
1991
fDate
16-19 June 1991
Firstpage
968
Lastpage
970
Abstract
Compact, lightweight pulse power systems are being developed to drive RF generators. The most feasible method of meeting these requirements is with high voltage PFN-Pulse Transformer (PPT) systems capable of driving the microwave tubes directly from the output of the transformer. To test the feasibility of this approach, a PPT system was designed and tested with an Split Cavity Oscillator (SCO) microwave generator. Results of the tests demonstrated satisfactory performance with this load and driver combination. The PPT system was designed with a 10X voltage step-up transformer and a 0.5 ohm, 2 /spl mu/s PFN. The maximum rated output voltage of the transformer was 200 kV with a 50 ohm load.
Keywords
High power microwave generation; Impedance; Magnetic cores; Power generation; Power transformer insulation; Pulse generation; Pulse transformers; Strips; System testing; Transformer cores;
fLanguage
English
Publisher
ieee
Conference_Titel
Pulsed Power Conference, 1991. Digest of Technical Papers. Eighth IEEE International
Conference_Location
San Diego, CA, USA
Print_ISBN
0-7803-0177-3
Type
conf
DOI
10.1109/PPC.1991.733446
Filename
733446
Link To Document