DocumentCode
2406006
Title
Manual filter tuning by cloning frequency domain data
Author
Lindner, Anton ; Kugler, Horst ; Biebl, Erwin
Author_Institution
SPINNER GmbH, Westerham
fYear
2007
fDate
9-12 Oct. 2007
Firstpage
329
Lastpage
331
Abstract
These instructions guide tuners to manually adjust coupled cavity microwave filters which are completely untuned. No computer-based measurement data processing is required during tuning. The method could also be used to serve computer based tuning algorithms that require pre-tuned filters. The tuning procedure is exemplified by tuning a cross-coupled 6-pole filter. It is not restricted in the application to similar filters with more or less poles and cross-couplings.
Keywords
circuit tuning; frequency-domain analysis; microwave filters; circuit tuning procedure; coupled cavity microwave filters; cross-coupled 6-pole filter; frequency domain data; manual filter tuning; Circuit optimization; Circuit simulation; Cloning; Frequency domain analysis; Microwave filters; Propagation losses; Resonator filters; Solid modeling; Tuned circuits; Tuning; cavity resonator filters; filter tuning;
fLanguage
English
Publisher
ieee
Conference_Titel
Microwave Conference, 2007. European
Conference_Location
Munich
Print_ISBN
978-2-87487-001-9
Type
conf
DOI
10.1109/EUMC.2007.4405193
Filename
4405193
Link To Document