DocumentCode
2408820
Title
A novel bandstop filter design using parallel coupled line resonators
Author
Lim, Won-Gyu ; Kim, Wan-Kyu ; Shin, Dong-Hoon ; Yu, Jong-Won
Author_Institution
Korea Adv. Inst. of Sci. & Technol., Daejon
fYear
2007
fDate
9-12 Oct. 2007
Firstpage
878
Lastpage
881
Abstract
In this paper, a novel compact bandstop filter having low insertion loss and low radiation loss is presented. The proposed filter uses a quarter-wavelength open-stub resonator with direct-connected microstrip transmission line. Due to the narrow gap between a resonator and a ground, we can realize low mismatch and the bandstop filter shows low insertion loss. In addition, this structure can reduce the radiation loss at the stopband due to the strong coupling between the resonator and the signal line. The fabricated bandstop filter with a single resonator has insertion loss of better than 0.5 dB in the passband, rejection of greater than 30 dB at stopband. The operating frequency of the proposed resonator can be varied by using the shunt capacitors between the resonator and the ground. Moreover, we will show several filter applications using this resonator.
Keywords
band-stop filters; microstrip lines; resonator filters; compact bandstop filter; direct-connected microstrip transmission line; parallel coupled line resonators; quarter-wavelength open-stub resonator; shunt capacitors; strong coupling; Band pass filters; Capacitors; Couplings; Frequency; Insertion loss; Microstrip filters; Microstrip resonators; Passband; Resonator filters; Transmission lines; Bandstop filter; CPW filter; band notch filter; open-stub resonator; resonator;
fLanguage
English
Publisher
ieee
Conference_Titel
Microwave Conference, 2007. European
Conference_Location
Munich
Print_ISBN
978-2-87487-001-9
Type
conf
DOI
10.1109/EUMC.2007.4405333
Filename
4405333
Link To Document