DocumentCode
2425805
Title
Synthesis and characterization of Fe-doped CeO2 nanoparticles and their photocatalytic activities
Author
Channei, Duangdao ; Wetchakun, Natda ; Siriwong, Chawarat ; Phanichphant, Sukon
Author_Institution
Dept. of Chem., Chiang Mai Univ., Chiang Mai, Thailand
fYear
2010
fDate
20-23 Jan. 2010
Firstpage
43
Lastpage
47
Abstract
In this research, cerium oxide (CeO2) nanoparticles were synthesized by the homogeneous precipitation. Cerium nitrate hexahydrate and ammonia solution were used as precursors. A mixture of water and ethylene glycol was used as solvent. The ratio of ethylene glycol /water mixed solvent was 80% by volume of ethylene glycol. Pure CeO2 nanoparticles were yellow powder. Particle size was found to be in the range of 5-6 nm with BET specific surface area of 140.62 m2/g. TGA/DSC was used to find the appropriate temperature for calcination. X-ray diffraction analysis showed that the particles exhibited cubic fluorite structure. Then, cerium oxide nanoparticles were impregnated with ferric nitrate at 0.25, 0.50, 0.75, 1.00, 1.50 and 2.00 mol.% of CeO2 by calcining the mixture at 400C°. Color of Fe-doped CeO2 became deeper yellow when mol.% Fe increased. Cerium oxide nanoparticles and the doped samples were characterized by using X-ray diffraction (XRD), the Brunauer, Emmett and Teller (BET), Transmission electron microscopy (TEM), Scanning electron microscopy (SEM) and Energy dispersive X-ray spectroscopy analysis (EDS). The photocatalytic activity of pure CeO2 and Fe-doped CeO2 were investigated for the degradation of oxalic acid and formic acid under visible irradiation using photocatalytic reactor. The effect of Fe on photocatalytic activity of CeO2 nanoparticles was verified. It was found that Fe-doped CeO2 was more effective than pure CeO2. The photocatalytic activity of Fe-doped CeO2 for mineralization of formic acid was better than that of oxalic acid (the mineralization time to degrade formic acid was less than that of oxalic acid). The best result of photocatalytic activity for the degradation of oxalic was obtained from 2.00 mol.% Fe-doped CeO2 nanoparticles. 1.00 mol.% Fe-doped CeO2 demonstrated the highest photocata- - lytic activity for the degradation of formic acid under visible irradiation. The enhanced performance observed for the Fe-doped CeO2 system was likely due to the formation of ferrioxalate and ferriformate complexes which could generate hydroxyl radical.
Keywords
X-ray chemical analysis; X-ray diffraction; calcination; catalysis; cerium compounds; iron; nanofabrication; nanoparticles; particle size; photochemistry; powders; precipitation; radiation effects; scanning electron microscopy; transmission electron microscopy; BET specific surface area; CeO2:Fe; EDS; SEM; TEM; X-ray diffraction analysis; XRD; ammonia solution; calcination; cerium nitrate hexahydrate; cubic fluorite structure; energy dispersive X-ray spectroscopy analysis; ethylene glycol-water mixed solvent; ferric nitrate; ferriformate complex formation; ferrioxalate complex formation; formic acid degradation; formic acid mineralization; homogeneous precipitation; hydroxyl radical; iron-doped ceria nanoparticles; oxalic acid degradation; particle size; photocatalytic activities; photocatalytic reactor; scanning electron microscopy; temperature 400 degC; transmission electron microscopy; visible irradiation; yellow powder; Cerium oxide; Photocatalysis; Visible light;
fLanguage
English
Publisher
ieee
Conference_Titel
Nano/Micro Engineered and Molecular Systems (NEMS), 2010 5th IEEE International Conference on
Conference_Location
Xiamen
Print_ISBN
978-1-4244-6543-9
Type
conf
DOI
10.1109/NEMS.2010.5592142
Filename
5592142
Link To Document