DocumentCode :
2426469
Title :
Optimization of bearing-inspection intervals
Author :
Garnero, M.-A. ; Beaudouin, F. ; Delbos, J.-P.
Author_Institution :
Res. & Studies Centre, Electr. de France, Chatou, France
fYear :
1998
fDate :
19-22 Jan 1998
Firstpage :
332
Lastpage :
338
Abstract :
The topic of this paper is the optimization of inspection intervals for the motor-pump set of the AFW system (auxiliary feedwater system) in a nuclear plant. The report focuses on plain hydrodynamic bearings and thrusts. The bearings inspection task requires the disassembly of the pump which is expensive and has not proved to be necessary so far. This paper shows the advantages of the combined use of experts judgments (for the selection of external influent parameters), physical modelling (for the quantification of wear) and operating experience (for the evaluation of failure rates). Physical modelling is very important indeed when poor information is available and especially when experts opinions are missing due to a poor number of operating hours
Keywords :
electric motors; failure analysis; inspection; machine bearings; nuclear power stations; optimisation; power system reliability; reliability; auxiliary feedwater system; disassembly; experts judgments; external influent parameters; failure rates evaluation; hydrodynamic bearings; inspection intervals optimisation; motor-pump set; nuclear power plant; operating experience; physical modelling; thrusts; wear quantification; Availability; Degradation; Fault trees; Hydrodynamics; Inspection; Lubricating oils; Lubrication; Maintenance; Petroleum; Stability analysis; Testing;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Reliability and Maintainability Symposium, 1998. Proceedings., Annual
Conference_Location :
Anaheim, CA
ISSN :
0149-144X
Print_ISBN :
0-7803-4362-X
Type :
conf
DOI :
10.1109/RAMS.1998.653801
Filename :
653801
Link To Document :
بازگشت