Title :
Minimum copper and core losses power inductor design
Author :
Bartoli, M. ; Reatti, A. ; Kazimierczuk, M.K.
Author_Institution :
Dept. of Electron. Eng., Florence Univ., Italy
Abstract :
A design procedure which allows for assembling power inductors with minimum overall power loss is given in this paper. The inductor design is carried out by using an iterative procedure where the operating flux density is increased from zero to the saturation value. For any given value of the flux density the winding resulting in the lower AC resistance is determined. Both solid round wire and Litz wire windings are considered. The significance of the paper is that the design procedure allows for the combination of the flux density and winding which result in the lower power loss operation is determined. Therefore, inductors designed by following this procedure result in a high efficiency and minimum temperature rise
Keywords :
design engineering; inductors; iterative methods; losses; magnetic cores; magnetic flux; minimisation; power inductors; windings; AC resistance; Litz wire windings; copper loss minimisation; core loss minimisation; design procedure; iterative procedure; operating flux density; power inductor design; round wire windings; Assembly; Circuits; Copper; Core loss; Frequency; Inductors; Postal services; Switching converters; Temperature; Wire;
Conference_Titel :
Industry Applications Conference, 1996. Thirty-First IAS Annual Meeting, IAS '96., Conference Record of the 1996 IEEE
Conference_Location :
San Diego, CA
Print_ISBN :
0-7803-3544-9
DOI :
10.1109/IAS.1996.559244
