• DocumentCode
    2435496
  • Title

    Network-controlled cell-breathing for capacity improvement in heterogeneous CDMA/TDMA scenarios

  • Author

    Pérez-Romero, J. ; Sallent, O. ; Agustí, R. ; García, N. ; Wang, L. ; Aghvami, H.

  • Author_Institution
    Univ. Politecnica de Catalunya, Barcelona
  • Volume
    1
  • fYear
    2006
  • fDate
    3-6 April 2006
  • Firstpage
    36
  • Lastpage
    41
  • Abstract
    This paper proposes a new common radio resource management (CRRM) methodology which allows increasing the capacity of heterogeneous CDMA/TDMA. This is achieved by controlling the effective cell radius of the CDMA-based system (i.e. a network-controlled cell-breathing) through appropriate initial RAT selection and vertical handover strategies, so that the interference level in the CDMA-based RAT is reduced while at the same time the target coverage area is assured by means of the cooperation of the FDMA/TDMA based RATs. The proposed approach is evaluated by means of system level simulations in a detailed scenario including UTRAN and GERAN as examples of CDMA and FDMA/TDMA-based access technologies. Results reveal that throughput improvements up to 24% can be achieved with respect to other CRRM strategies based on load balancing principles
  • Keywords
    cellular radio; code division multiple access; frequency division multiple access; mobility management (mobile radio); telecommunication control; time division multiple access; FDMA; GERAN; UTRAN; capacity improvement; common radio resource management; heterogeneous CDMA/TDMA scenarios; load balancing principles; network-controlled cell-breathing; vertical handover strategies; Frequency division multiaccess; Intelligent networks; Interference; Land mobile radio cellular systems; Multiaccess communication; Radio access networks; Radio spectrum management; Rats; Resource management; Time division multiple access;
  • fLanguage
    English
  • Publisher
    ieee
  • Conference_Titel
    Wireless Communications and Networking Conference, 2006. WCNC 2006. IEEE
  • Conference_Location
    Las Vegas, NV
  • ISSN
    1525-3511
  • Print_ISBN
    1-4244-0269-7
  • Electronic_ISBN
    1525-3511
  • Type

    conf

  • DOI
    10.1109/WCNC.2006.1683437
  • Filename
    1683437