DocumentCode :
2450649
Title :
The Design of High Gain Dipole Antenna with Metamaterial Cover
Author :
Rong, Guo ; Zi-bin, Weng ; Yong-chang, Jiao
Author_Institution :
Nat. Lab. of Antenna & Microwave Technol., Xidian Univ., Xi´´an
fYear :
2006
fDate :
26-29 Oct. 2006
Firstpage :
1
Lastpage :
4
Abstract :
In this paper, we analyze a metamaterial cover based on metal wire array, and use it to increase the gain of dipole from 2.15 dB to 14.5 dB, with narrow beam and low side-lobe levels. And then provide the use of metal strips etched by printed circuit board (PCB) process to substitute the metal wires in order to reduce the weight and be easy in processing. The structure of metal strip array can also greatly increase the gain of dipole and possess good practical engineering application.
Keywords :
dipole antennas; metamaterials; printed circuits; dipole antenna; etching; gain 2.15 dB to 145 dB; high gain antenna; low side-lobe levels; metal strips; metal wire array; metamaterial cover; narrow beams; printed circuit board; Dipole antennas; Directive antennas; Electromagnetic scattering; Frequency; Metamaterials; Microwave technology; Permeability; Permittivity; Refractive index; Wire; high gain; metal strip; metamaterial;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Antennas, Propagation & EM Theory, 2006. ISAPE '06. 7th International Symposium on
Conference_Location :
Guilin
Print_ISBN :
1-4244-0162-3
Electronic_ISBN :
1-4244-0163-1
Type :
conf
DOI :
10.1109/ISAPE.2006.353571
Filename :
4168232
Link To Document :
بازگشت