DocumentCode
2461006
Title
Applying Passivity-Based Control for the DC/DC converter of PEM fuel cell
Author
Tofighi, A. ; Kalantar, M.
Author_Institution
Department of Electrical Engineering, Iran University of Science and Technology, Tehran, Iran
fYear
2010
fDate
17-18 Feb. 2010
Firstpage
439
Lastpage
444
Abstract
FC is a good alternative for using clean energy in most of residential and industrial applications. The FC output voltage changes proportional with current of load. Therefore for providing constant voltage in the output of FC is used DC/DC converter. In this paper, a dynamic model of PEMFC is studied. A boost converter is an interface between the FC and load. The switching model of DC/DC converter considering the losses of elements is introduced. Then a Passivity-Based Control is used for control of converter output. Simulation results show that the proposed method is very accurate in the regulating of output voltage for step changes in the input voltage and load resistance.
Keywords
Chemicals; Control systems; DC-DC power converters; Equations; Fuel cells; Load modeling; Power system modeling; Sliding mode control; Temperature; Voltage control; DC/DC converter; Dynamic Model; Fuel Cell; Passivity-Based Control;
fLanguage
English
Publisher
ieee
Conference_Titel
Power Electronic & Drive Systems & Technologies Conference (PEDSTC), 2010 1st
Conference_Location
Tehran, Iran
Print_ISBN
978-1-4244-5944-5
Type
conf
DOI
10.1109/PEDSTC.2010.5471774
Filename
5471774
Link To Document