Title :
Design and Implementation of CAN-USB Converter Based on ARM7 Serial Protocol API
Author :
Hsu, Wei-Chih ; Liu, Shih-Tsung
Author_Institution :
Dept. of Comput. & Commun. Eng., NKFUST, Kaohsiung, Taiwan
Abstract :
Controller Area Network (CAN) is a serial communication standard that supports distributed real-time control with a very high level of security. CAN provides multimaster capabilities, and is particularly suited to networking "intelligent" devices as well as sensors and actuators within a system or sub-system. CAN bus devices are compatible with nearly every PCI board. However, PCI boards are not compatible with notebook computers. Thus, this paper proposes a design of a CAN-USB convertor, allowing the USB port to be used for the control of CAN devices. The ARM7 CPU provides two CAN ports and two USB ports, thus being selected as an implementation target.
Keywords :
application program interfaces; controller area networks; convertors; integrated circuit design; microprocessor chips; peripheral interfaces; protocols; ARM7 CPU; ARM7 chip; ARM7 serial protocol API; CAN bus devices; CAN ports; CAN-USB converter design; PCI board; USB ports; application program interface; controller area network; distributed real-time control; intelligent device networking; multimaster capabilities; protocol converter; serial communication standard; universal serial bus; Computer architecture; Computers; Microprogramming; Protocols; Registers; Universal Serial Bus; Controller Area Network (CAN); Protocol Converter;
Conference_Titel :
Computer, Consumer and Control (IS3C), 2012 International Symposium on
Conference_Location :
Taichung
Print_ISBN :
978-1-4673-0767-3
DOI :
10.1109/IS3C.2012.91
