Title :
Identification of sensitive R-L parameters of a multiphase drive by a vector control
Author :
Bruyere, A. ; Semail, E. ; Locment, F. ; Bouscayrol, A. ; Dubus, J.M. ; Mipo, J.C.
Author_Institution :
Arts et Metiers ParisTech, Lille
Abstract :
This paper focuses on an experimental method to determine the electric parameters of a seven-phase low-voltage multiphase drive. The drive is a belt driven starter-alternator for powerful cars with hybrid electrical vehicles (REV) functions. The resistive and inductive parameters are necessary to obtain the six characteristic time constants of the control modeling. Classical direct measurements lead to imprecise results because of very low values for the windings electric resistance (a few mOmega) and inductance (a few muH). Effects of the imprecision on the measurements are all the more important that time constants are obtained by a ratio of cyclic inductances by resistance, with cyclic inductances being a linear combination of seven measured inductances. The methodology for identification detailed in this paper is based on a stator current vector control, in a multi-reference frame. This methodology allows us to get directly these time constants. Numerous measurements allow the robustness of the method to be evaluated.
Keywords :
alternators; belts; electric drives; hybrid electric vehicles; machine vector control; machine windings; robust control; belt driven starter-alternator; hybrid electrical vehicles; inductance; multiphase drive; powerful cars; sensitive R-L parameters; stator current vector control; windings electric resistance; Belts; Electric resistance; Electric variables measurement; Electrical resistance measurement; Hybrid electric vehicles; Inductance measurement; Robustness; Stators; Time measurement; Vehicle driving;
Conference_Titel :
Power Electronics Specialists Conference, 2008. PESC 2008. IEEE
Conference_Location :
Rhodes
Print_ISBN :
978-1-4244-1667-7
Electronic_ISBN :
0275-9306
DOI :
10.1109/PESC.2008.4592320