A single-phase active filter using an H-Bridge PWM converter with a sampling frequency quadruple of the switching frequency

This paper presents a digital current regulator for an H-bridge PWM converter, having a sampling frequency equal to quadruple of the switching frequency. The current regulator detects the current and manipulates the voltage reference not only at the upper and lower peaks of the PWM triangle carrier but also at its zero crossings. This paper theoretically discusses the switching sequence of the H-bridge PWM converter and reveals the amount of the voltage error and the condition where the voltage error occurs. A modified deadbeat current regulator is proposed to suppress the current oscillation induced by the voltage error, based on the theoretical analysis. Experimental results are shown to verify the control performance of the proposed current regulator. Moreover, a proposed current regulator is applied to a single-phase active power filter to demonstrate the effectiveness in harmonic compensation.