DocumentCode
2464727
Title
The strobe pulse shaper built on strip line shielded by ferrite
Author
Ruban, V.P.
Author_Institution
A. Ya. Usikov Inst. of Radio Phys. & Electron., Ukraine Nat. Acad. of Sci., Kharkiv, Ukraine
fYear
2004
fDate
19-22 Sept. 2004
Firstpage
296
Lastpage
298
Abstract
The present work deals with the investigation of the pulse shaper based on a shorted symmetrical strip line. It has been determined that the best balancing and minimum afterpulse oscillations are provided in the pulse shaper where at first short pulses are formed and then balancing of the output signal is performed. The best strobe pulse shaper is a shaper with ferrite that has a larger relative permeability. The suitable design of the line-balance converter for the 100 ps strobe pulse shaping was obtained.
Keywords
convertors; electromagnetic shielding; ferrites; finite difference time-domain analysis; magnetic permeability; oscillations; pulse shaping circuits; strip line circuits; FDTD method; afterpulse oscillations; ferrite strip line shielding; finite difference time domain; line-balance converter; relative permeability; strobe pulse shaper; symmetrical strip line; Ferrites; Finite difference methods; Frequency; Impedance matching; Pulse circuits; Pulse shaping methods; Sampling methods; Strips; Time domain analysis; Voltage;
fLanguage
English
Publisher
ieee
Conference_Titel
Ultrawideband and Ultrashort Impulse Signals, 2004 Second International Workshop
Print_ISBN
0-7803-8673-6
Type
conf
DOI
10.1109/UWBUS.2004.1388135
Filename
1388135
Link To Document