DocumentCode
247201
Title
Low-cost flexible RFID tag for on-metal applications
Author
Suyoung Jang ; Sangkil Kim ; Tentzeris, Manos M.
Author_Institution
Coll. of Electr. & Comput. Eng., Georgia Inst. of Technol., Atlanta, GA, USA
fYear
2014
fDate
6-11 July 2014
Firstpage
1298
Lastpage
1299
Abstract
This paper documents the design of a low-cost RFID tag that is operable among metallic surfaces. The tag uses a loop type antenna that is small, flexible, and vialess. In addition, the design only requires low-cost, easy-to-obtain materials. The tag has been successfully tested on metal at 915MHz. Thus, the tag can be used in non-ideal settings or as surface mounts on metallic objects. Simulation and experimental results are also discussed in the paper.
Keywords
UHF antennas; loop antennas; radiofrequency identification; frequency 915 MHz; loop-type antenna; low-cost flexible RFID tag; metallic objects; metallic surfaces; nonideal settings; on-metal application; surface mounts; Antenna measurements; Antennas; Copper; Materials; Radiofrequency identification; Surface impedance;
fLanguage
English
Publisher
ieee
Conference_Titel
Antennas and Propagation Society International Symposium (APSURSI), 2014 IEEE
Conference_Location
Memphis, TN
ISSN
1522-3965
Print_ISBN
978-1-4799-3538-3
Type
conf
DOI
10.1109/APS.2014.6904976
Filename
6904976
Link To Document