DocumentCode
2484532
Title
Wide-band inductive voltage divider for ac voltage calibrations
Author
Skubis, T. ; Klonz, M.
Author_Institution
Katedra Metrol. i Aut. Elektrot, Gliwice, Poland
fYear
1996
fDate
17-21 June 1996
Firstpage
576
Lastpage
577
Abstract
The paper describes an inductive voltage divider developed for fitting the low-voltage range measuring instruments to the ac-dc transfer standards for voltages of 1 V. The divider, the associated circuit and the calibration procedure allow one to compare the standard and unknown ac instrument at 1:10 ratio in the frequency band from 1 kHz to 1 MHz. The construction and uncertainty budget are given.
Keywords
calibration; inductors; measurement errors; measurement standards; voltage dividers; voltage measurement; 1 V; 1 kHz to 1 MHz; AC voltage calibrations; AC-DC transfer standards; construction; load error measurement; low-voltage range measuring instruments; ratio winding; screening; toroidal magnetic cores; two-stage divider; uncertainty budget; wide-band inductive voltage divider; Calibration; Instruments; Magnetic cores; Magnetic flux; Magnetic separation; Measurement standards; Sockets; Toroidal magnetic fields; Voltage; Wideband;
fLanguage
English
Publisher
ieee
Conference_Titel
Precision Electromagnetic Measurements Digest, 1996 Conference on
Conference_Location
Braunschweig, Germany
Print_ISBN
0-7803-3376-4
Type
conf
DOI
10.1109/CPEM.1996.547357
Filename
547357
Link To Document