Hardware implementaion of 10w PV panel as STATCOM voltage compensation in a daytime distribution utility

Hardware Implementation of PV as STATCOM voltage compensation in day time distribution Utility. This prototype designed in Hardware Technology, with Experimental setup, is application for Residential Solar Power Distribution, is a small proposed Kit for only Few watts generation. here mainly designed four components (1) PIC Micro controller (2) driver circuit (3) Single Phase Voltage Source Inverter (4)STATCOM(Static Synchronous Compensator).kit is operating with PIC Micro controller internally dump with Embedded programme, driver circuit give input to Single Phase Inverter, is developed with four MOSFET switches and two pins one is Input pin another is Output pin, Finally FACTs(Flexible AC Transmission) Device STATCOM, is developed With two round type conductors and Resistors. new application for Solar power distribution of residential purpose, This Paper Presents Comparison PV Inverter Without STATCOM and PV Inverter With STATCOM Voltage, Here using 10w PV(Photovoltaic) Panel Connected to Inverter Input pin check the Output Voltage of inverter, with help of DVM(Digital Multi Meter).and also check the output for STATCOM side, this difference mainly present in this paper. applications of this paper Increasing the PV power and Efficiency.