DocumentCode :
2528480
Title :
Development of a Cylindrical Neutron Generator using RF-driven Plasma
Author :
Chung, K.J. ; Jung, H.D. ; Park, J.Y. ; Hwang, Y.S.
Author_Institution :
Dept. of Nucl. Eng., Seoul Nat. Univ.
Volume :
2
fYear :
2006
fDate :
25-29 Sept. 2006
Firstpage :
674
Lastpage :
677
Abstract :
A compact cylindrical neutron generator using RF (radio-frequency) inductively-coupled plasma has been developed in radially convergent ion beam extraction configuration. Since the RF plasma source has characteristics of high plasma density, low gas pressure, high mono-atomic fraction, and long lifetime, it is known to be suitable for generating high neutron yield with high efficiency. In order to increase neutron yield, the energy and the number of incident particles should be as large as possible. Since the cylindrical source can be operated as a line source configuration the extracted beam current can be increased easily. In this paper, experimental results with the cylindrical neutron generator are given and the operating characteristics of the device are discussed to improve neutron generation efficiency
Keywords :
ion sources; neutrons; plasma sources; RF plasma source; RF-driven plasma; beam current extraction; cylindrical neutron generator; high neutron yield; ion beam extraction configuration; line source configuration; radio-frequency inductively-coupled plasma; Character generation; Ion beams; Ion sources; Neutrons; Plasma accelerators; Plasma density; Plasma immersion ion implantation; Plasma measurements; Plasma properties; Plasma sources;
fLanguage :
English
Publisher :
ieee
Conference_Titel :
Discharges and Electrical Insulation in Vacuum, 2006. ISDEIV '06. International Symposium on
Conference_Location :
Matsue
ISSN :
1093-2941
Print_ISBN :
1-4244-0191-7
Electronic_ISBN :
1093-2941
Type :
conf
DOI :
10.1109/DEIV.2006.357392
Filename :
4194973
Link To Document :
بازگشت