Momentum-based reactive stepping controller on level and non-level ground for humanoid robot push recovery

This paper presents a momentum-based reactive stepping controller for humanoid robot push recovery. By properly regulating combinations of linear and angular momenta, the controller can selectively encourage the robot to recover its balance with or without taking a step. A reference stepping location is computed by modeling the humanoid as a passive rimless wheel with two spokes such that stepping on the location leads to a complete stop of the wheel at the vertically upright position. In contrast to most reference points for stepping based on pendulum models such as the capture point, our reference point exists on both level and non-level grounds. Moreover, in contrast with continuously evolving step locations, our step location is stationary. The computation of the location of the reference point also generates the duration of step which can be used for designing a stepping trajectory. Momentum-based stepping for push recovery is implemented in simulations of a full size humanoid on 3D non-level ground.