Development of a semi self-contained wall climbing robot with scanning type suction cups

Author

Yano, Tomoaki ; Suwa, Tomohiro ; Murakami, M. ; Yamamoto, Takayuki

Author_Institution

Mech. Eng. Lab., AIST, Ibaraki, Japan

Volume

2

fYear

1997

fDate

7-11 Sep 1997

Firstpage

900

Abstract

A semi self-contained wall climbing robot with scanning type suction cups is developed and rested. This robot has two vacuum pumps on it. The robot is connected to the equipment on the ground only through the electric power cables and information cables. From the experimental results, the robot can walk around on walls, clear steps, and stick on cracks and gaps. The walking speed attains 138 cm/min, which is 59% faster than the wall climbing robot I with tubes connected to the external vacuum pump on the ground. These experimental results show higher possibility towards the development of a complete self-contained wall climbing robot by putting a battery and a CPU on the robot

Keywords

computerised control; legged locomotion; vacuum pumps; scanning type suction cups; semi self-contained wall climbing robot; vacuum pumps; Automatic testing; Batteries; Cables; Climbing robots; Electron tubes; Laboratories; Legged locomotion; Mechanical engineering; Research and development; Wounds;

fLanguage

English

Publisher

ieee

Conference_Titel

Intelligent Robots and Systems, 1997. IROS '97., Proceedings of the 1997 IEEE/RSJ International Conference on

Conference_Location

Grenoble

Print_ISBN

0-7803-4119-8

Type

conf

DOI

10.1109/IROS.1997.655116

Filename

655116