Title :
Analysis of channel characteristics for motor cable communication with inductive signal coupling
Author :
Kosonen, A. ; Ahola, J. ; Pinomaa, A.
Author_Institution :
Dept. of Electr. Eng., Lappeenranta Univ. of Technol. (LUT), Lappeenranta, Finland
Abstract :
It has been shown that power line communication (PLC) is a feasible method for data transmission between a low-voltage (LV) motor and a frequency converter through the power cable. In this paper, attenuation and noise power spectrum of the communication channel are analyzed. The analysis is based on a laboratory test setup, laboratory measurements, simulation models, and known power spectral density (PSD) limits for commercial PLC equipment. Based on the analysis, a feasible frequency band for the motor cable communication with an inductive coupling circuit and without inverter output filter is proposed for different cable lengths covering typical lengths used in industrial LV motor drive applications.
Keywords :
cables (electric); carrier transmission on power lines; motor drives; PLC; PLC equipment; attenuation spectrum; frequency converter; inductive signal coupling; low- voltage motor; motor cable communication; noise power spectrum; power line communication; power spectral density; Communication cables; Couplings; Data communication; Frequency conversion; Induction motors; Laboratories; Power cables; Power line communications; Programmable control; Signal analysis; inductive coupling; motor cable; power line communication (PLC); variable-speed electric drive;
Conference_Titel :
Power Line Communications and Its Applications (ISPLC), 2010 IEEE International Symposium on
Conference_Location :
Rio de Janeiro
Print_ISBN :
978-1-4244-5009-1
Electronic_ISBN :
978-1-4244-5010-7
DOI :
10.1109/ISPLC.2010.5479906