Simulation of the brushless DC machine

Author

Salem, Thomas ; Haskew, Tim A.

Author_Institution

Dept. of Electr. Eng., Alabama Univ., Tuscaloosa, AL, USA

fYear

1995

fDate

12-14 Mar 1995

Firstpage

18

Lastpage

22

Abstract

Research efforts on the brushless DC machine (BDCM) have produced a computer simulation model of the machine applicable for analysis of the machine during fault conditions. Several failure modes have been studied using this simulation technique. Modeling the motor during flux weakening, bearing failure, armature winding open circuiting, and armature winding short circuiting along with the operation of the machine under normal conditions is presented. This simulation model will facilitate further study of the BDCM and its utilization in the electromechanical actuation and control application

Keywords

brushless DC motors; digital simulation; electric machine analysis computing; failure analysis; magnetic flux; rotors; short-circuit currents; simulation; armature winding open circuiting; armature winding short circuiting; bearing failure; brushless DC machine; brushless DC motor; computer simulation model; control application; electromechanical actuation; failure modes; fault conditions; flux weakening; Brushless DC motors; Circuit faults; Circuit simulation; Computational modeling; Computer simulation; DC machines; DC motors; Machine windings; Motor drives; Stator windings;

fLanguage

English

Publisher

ieee

Conference_Titel

System Theory, 1995., Proceedings of the Twenty-Seventh Southeastern Symposium on

Conference_Location

Starkville, MS

ISSN

0094-2898

Print_ISBN

0-8186-6985-3

Type

conf

DOI

10.1109/SSST.1995.390594

Filename

390594